| –
| Place a 14 interface wrench on the tensioning roller's flat surfaces -arrow A-. |
Note! | A better position for the wrench is obtained by inclining it slightly towards the oil filter. |
| –
| Relieve Poly-V belt tension using the wrench to turn the tensioning roller in the direction shown -arrow B-. |
Note! | t
| Pay special attention while relieving tension so as not to damage the radiator. |
| t
| Turn the tensioning roller just enough to be able to remove the belt Poly-V. |
| –
| Remove the Poly-V belt. |
|
|
|
