seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Engine cooling > < Sump, oil pump, balance shaft assembly

Leon Mk1

Checking oil pressure
Checking oil pressure
Special tools and workshop equipment required
   
t  Oil pressure tester -V.A.G 1342/-, see equivalent → Anchor
Operation process
l  Oil level OK
l  Engine oil temperature, approx 80 ℃.
–  Remove oil pressure switch -F1- → Chapter.
–  Connect oil pressure tester -V.A.G 1342- to bore for oil pressure switch.
–  Screw an old oil pressure switch into hole on oil pressure tester -V.A.G 1342- to seal hole.
l  Oil pressure at engine idle: minimum 0.8 bar.
l  Minimum oil pressure at 2,000 rpm: min. 1.4 bar
  W00-0516

Engine cooling > < Sump, oil pump, balance shaft assembly