seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Removing and installing exhaust gas recirculation cooler > < Assembly overview - exhaust gas temperature regulation

Leon Mk1

Checking exhaust gas recirculation cooler change-over
Checking exhaust gas recirculation cooler change-over
Special tools and workshop equipment required
   
t  Vacuum pump -VAS 6213-, see equivalent → Anchor
  W00-10259
Operation process
–  Remove engine cover panel -arrows-.
  E10-10127
–  Disconnect vacuum hose from vacuum unit and connect the hand vacuum pump -VAS 6213- in its place.
–  Operate hand vacuum pump to create a vacuum.
l  The linkage of the changeover for the exhaust gas recirculation cooler must move -arrows-.
If linkage does not move or only moves in jerks:
t  The vacuum unit is defective.
t  The change-over flap for exhaust gas recirculation is sticking.
  A26-11053

Removing and installing exhaust gas recirculation cooler > < Assembly overview - exhaust gas temperature regulation