| VW / AUDI tool | SEAT tool |
| attachment tool -2024A- | Support tool -T20127- See image of the tool or equipment → Chapter |
| Seal extractor -2085- | Extractor kit -T20143- |
| Fitting sleeve -3265- | |
| Adjustment tool -3070- | Centring pin -T20049- See image of the tool or equipment → Chapter |
| Counterhold tool -3094- | Push rod -U 30042- See image of the tool or equipment → Chapter |
| Counter support -3099- | Retention tool -T20018B- see image for tool or unit → Chapter |
| Spanner -3185- | No equivalent |
| Extractor -3203- | Extractor kit -T20143- See image of the tool or equipment → Chapter |
| Spanner -3217- See image of the tool or equipment → Chapter | Rotation tool -T20207- |
| Jointed spanner -3220- | No equivalent |
| Extractor -3240- | Extractor kit -T20143- See image of the tool or equipment → Chapter |
| Socket, AF 5 - 3249- | No equivalent |
| Pliers -3314- | No equivalent |
| Wrench kit -3337- | No equivalent |
| Counterhold tool -3359- | Retaining tool -T20102- see image for tool or unit → Chapter |
| Extractor -3364- | Extractor -T20058A- See image of tool or equipment → Chapter |
| Press tool -3365- | Plunger -T20039-. See image of the tool or equipment → Chapter |
| Test pin -3393- | No equivalent |
| No equivalent | Wrench -T20126- |
| Counterhold tool -10-201- | Retention tool -T20176- see image for tool or unit → Chapter |
| Inlay tool - 10-203- | Guide bush -T20081B- See image of the tool or equipment → Chapter |
| Suspension tool -10-222A- | Support -U-30025E- See image of the tool or equipment → Chapter |
| Inner extractor -Kukko 21/1- | Extractor kit -T20140- See image of the tool or equipment → Chapter |
| Measuring tool -T10007- | No equivalent |
| attachment tool -T10038- | No equivalent |
| Counterhold tool -T10050- | No equivalent |
| Counterhold tool -T10051- | No equivalent |
| Extractor -T10052A- | No equivalent |
| Guide sleeve -T10053- | Guide bush -T20081B- See image of the tool or equipment → Chapter |
| Extractor -T10055A- | No equivalent |
| Spanner -T10058- | No equivalent |
| Installation tool -T10071- | No equivalent |
| Extractor -T10118- | No equivalent |
| Fitting tool -T10132- | No equivalent |
| Kit -T10133- | No equivalent |
| Centring pin -T10134- | No equivalent |
| attachment tool -T10172- | Retention tool -T20018B- see image for tool or unit → Chapter |
| Counterhold tool -T10255- | No equivalent |
| Spanner -T10264- | No equivalent |
| Counterhold tool -T10265- | No equivalent |
| Socket SW 24 -T10361- | Hexagon key extension, 24 mm |
| Bit XZN 10 -T10385- | Socket wrench XZN M10 long -SAT 1006/2 10L- see image for tool or unit → Chapter |
| Removal tool -T10099-. See figure for tools or unit → Chapter, insert tool for torque wrench -T10393- See figure for tools and units → Chapter | Socket wrench XZN M14 -SAT 1006/2 14- |
| Slider -T10377- | No equivalent |
| Puller -T10392- with pressure element -T10392/1- | No equivalent |
| Set of wrenches 17 mm -T10395- | Socket wrench 17 mm -T20211-flexible-head wrench 17 mm -T20212- |
| Multi-point bit -T40055- | Flexible-head spanner SW 17 -T20212- |
| Extractor -T40064- | No equivalent |
| Thrust piece -T40064/1- | No equivalent |
| Installation tool, Camshaft -T40094A- | No equivalent |
| Camshaft clamping tool -T40095- | No equivalent |
| Camshaft fitting tool -T40096- | No equivalent |
| Adjustment tool -T40098- | No equivalent |
| Bit XZN 8 -T40159- | No equivalent |
| Seal extractor -T40195- | No equivalent |
| Socket (27 mm) -T40218- | Hexagon key extension, 27 mm |
| Pressure tester -VAG 1274B- | Cooling system tester -SAT 1274- see image of the tool or equipment → Chapter |
| Adapter -V.A.G 1274/8- | No equivalent |
| Adapter -V.A.G 1274/9- | |
| Adapter -VAG 1274/10- | No equivalent |
| Torque wrench (5 - 50 Nm) -V.A.G 1331- and Torque wrench (40 - 200 Nm) -VAG 1332- | Torque wrench socket set -SAT 8010- See image of the tool or equipment → Chapter |
| Ratchet 1/2' x 9-12 -V.A.G 1331/1- | No equivalent |
| Tool insert (17 mm) -V.A.G 1331/6- | Open support 17 -SAT 8010/17A-. See image of the tool or equipment → Chapter |
| Oil pressure tester -V.A.G 1342/- | No equivalent |
| Measurement device -V.A.G 1348/2 B- | No equivalent |
| Remote control -VAG 1348/3A- | No equivalent |
| Engine and gearbox jack -VAG 1383A- | Engine and gearbox jack -SAT 1040- See image of tool or unit → Chapter |
| Hand-held multimeter -V.A.G 1526C- | No equivalent |
| Manual ? circuit analyzer -V.A.G 1526D- withtemperature sensor -V.A.G 1526D/1- | No equivalent |
| Pressure tester -V.A.G 1527/B- | No equivalent |
| Auxiliary measuring tool -V.A.G 1594/C-, see equivalent | No equivalent |
| No equivalent | Reduction piece from 1/2" to 3/8" -SAT 1006/37- |
| Cooling system leakage tester -VAG 1687- | No equivalent |
| Compression tester -V.A.G 1763- | No equivalent |
| Oil extractor -VAG 1782- | Oil extractor -SAT 1100- See image of the tool or equipment → Chapter |
| Wiring harness repair set -VAS 1978A- | No equivalent |
| Central diagnosis -VAS 505X-. | No equivalent |
| Removal / installing device for valve cotters -VAS 5161- with guide plate -VAS 5161/23- and knurled spacer ring -VAS 5161/23-1- | No equivalent |
| Fuel pump unit -VAS 5190- | No equivalent |
| Dial gauge -VAS 6079- | |
| Engine and gearbox jack -VAS 6095- | Support tool -T20172/1, /2, /3, /4A, /5- see image of the tool or equipment → Chapter |
| Coolant charger -VAS 6096- | No equivalent |
| Workshop crane -VAS 6100- | No equivalent |
| Engine sealing plug set -VAS 6122- | No equivalent |
| Drip tray -VAS 6208- | Drip tray -T20173- See image of the tool or equipment → Chapter |
| Vacuum pump -VAS 6213- | Pressure / underpressure pump -SAT 1390- see image for tool or unit → Chapter |
| Chain pipe cutter -VAS 6254- | Pliers -U-40075- See image of the tool or equipment → Chapter |
| Tester -VAS 6330- | No equivalent |
| Pliers -VAS 6340- | Pliers -T20174- See image of the tool or equipment → Chapter |
| Pliers for spring-loaded band-type clamps -VAS 6499-. | Pliers -SAT 1105-. See image of the tool or equipment → Chapter |
| Temperature measuring device -VAS 6519- | Digital thermometer -SAT 4002- See image of the tool or equipment → Chapter |
| Press tool -VW 207C- | Plunger -T20061-. See image of the tool or equipment → Chapter |
| awl -VW 222- | Plunger -T20019-. See image of the tool or equipment → Chapter |
| Measuring bridge -382/7- and Final level plate -385/17- | Support -T20026- See image of the tool or equipment → Chapter |
| Adjustment tool -VW 387- | Support -T20020- See image of the tool or equipment → Chapter |
| Support tool -VW 540- | Engine bracket -T20172/3-. See image of the tool or equipment → Chapter |
| Spanner -3320- | Spanner -T20042- See image of the tool or equipment → Chapter |
| Pressure tester -VAG 1318- | No equivalent |
