Leon Mk1
| Vehicles with air conditioner |
| 1 - | 10 Nm + 90° (1/4 turn) further |
| q | 4x |
| q | Replace |
| 2 - | Belt pulley and vibration damper |
| 3 - | 25 Nm |
| 4 - | Alternator |
| 5 - | Poly V-belt tensioning element |
| q | Rotate using a (16 mm) open-ended spanner for releasing the tension on the Poly-V belt → Chapter |
| 6 - | Spring retainer |
| q | For alternator and air conditioner's compressor |
| 7 - | 25 Nm |
| 8 - | 45 Nm |
| q | 6 off |
| q | Observe tightening sequence → Fig.. |
| 9 - | Spring retainer |
| q | For the lower part of the supercharger air tube |
| 10 - | 8 Nm |
| q | 2 off |
| 11 - | 25 Nm |
| q | 3 off |
| 12 - | Air conditioning compressor |
| 13 - | Dowel sleeves |
| 14 - | Poly-V belt |
| q | Mark direction of rotation before removing. |
| q | Check for wear |
| q | Do not bend |
| q | removing and fitting → Chapter |
