Leon Mk1
Intake manifold and accessory parts: Assembly overview |
1 - | Guide tube |
q | Oil dipstick |
2 - | Oil seal |
q | Renewing |
3 - | Gasket |
q | Renewing |
4 - | 8 Nm |
5 - | Fuel return line |
6 - | 9 Nm |
q |
7 - | Intake manifold |
q | With intake manifold flap motor -V157- and intake manifold flap potentiometer -G336- |
q | Must not be dismantled. |
q | Removing and installing → Chapter |
8 - | Retainer |
q | For the change-over valve for the exhaust gas recirculation radiator -N345- |
9 - | 9 Nm |
10 - | Exhaust gas recirculation cooler changeover valve -N345- |
11 - | Gasket |
q | Renewing |
12 - | 20 Nm |
13 - | Connecting pipe |
q | To the exhaust gas recirculation radiator |
14 - | Clamp, 5 Nm |
q | Renewing |
15 - | Coupling |
q | For exhaust gas recirculation |
16 - | 8 Nm |
17 - | Oil seal |
q | Renewing |
18 - | Throttle valve control mechanism -J338- |
q | With throttle valve potentiometer -G69-. |
q | Removing and installing → Chapter |
19 - | 8 Nm |
20 - | 9 Nm |
21 - | Clip |