When working on the fuel supply and injection system, pay careful attention to the following „6 rules“ for cleanliness: |
t
| Thoroughly clean all connections and surrounding areas before disconnecting. |
t
| Place removed parts on a clean surface and cover. Use only lint-free cloths. |
t
| Carefully cover opened components or seal if repairs cannot be carried out immediately. |
t
| Only install clean components: only remove replacement parts from packaging immediately prior to installation. Do not use parts that have not been stored in their packing (e.g. in tool boxes etc.). |
t
| When the system is open: Do not use compressed air. Do not move vehicle. |
t
| Also ensure that no diesel fuel comes into contact with the coolant hoses. Should this occur, the hoses must be cleaned immediately. Damaged hoses must be renewed. |
|
|
|