Leon Mk1
Fuel delivery unit and fuel gauge sender - exploded view |
1 - | Fuel delivery unit |
q | Checking fuel pump (electrical test) → Chapter |
q | Removing and installing → Chapter |
2 - | Fuel gauge senders -G- |
q | Checking resistance values → Chapter |
q | Removing and installing → Chapter |
3 - | Injector pipe |
q | To disengage, press the clip in the joint to unlock it |
4 - | Seal |
q | Replace |
q | Install in the dry condition |
5 - | Fuel return line |
q | From fuel filter. |
q | Mark before removing |
q | To disengage, press the clip in the joint to unlock it |
q | Do not kink |
q | Note the direction of the arrow (fuel supply or fuel return system) on flange when installing |
q | Install on fuel tank |
6 - | Fuel supply line |
q | To fuel filter |
q | Mark before removing |
q | To disengage, press the clip in the joint to unlock it |
q | Do not kink |
q | Note the direction of the arrow (fuel supply or fuel return system) on flange when installing |
q | Install on fuel tank |
7 - | Electrical connector |
q | For the fuel gauge sender -G- |
q | For fuel pump -G6- |
8 - | Locking ring |
q | Removing and installing with the rotation tool -T10202- |
q | Tighten to 145 Nm |
9 - | Suction-jet pump |