–
| Check the dimensions in the right suspension for the engine and gearbox: |
l
| The heads of the two bolts -2- must be parallel to the edge of the support arm -3- for the engine bracket. |
l
| Between the engine support -1- and bracket -4- there must be a distance of -x- = 16mm. |
Note It is also possible to check the distance -x- = 16 mm using, for example, a round object of the appropriate size. |
–
| If the separation measurement is very large or very small, the engine/gearbox assembly supports must be adjusted → Chapter. |
|
|
|