SEAT Workshop Service and Repair Manuals

Removing and installing radiator cowl Removing → Anchor Installing → Anchor

Removing –  Remove the air conduit cover by releasing the side tabs -arrows-.

–  Release the lower air duct by releasing the tabs -arrows-. –  Detach bottom section of air duct with air hose.

–  Remove bolts -1- at top.   Note Ignore positions -2 and 3-.

–  Release the hose clamp -2-. –  Remove bolt -4-. –  Disconnect electrical connector -arrow-.   Note Ignore positions -1 and 3-.

–  Release the fasteners -1 and 2- to remove the central soundproofing sump.

–  Remove the air conduit guard -Pos. 1 and 2-.

–  Unscrew bolts -1- and remove the air duct.   Note Ignore positions -2,3, 4- and the -arrow-.

–  Disconnect connector -2-. –  Remove bolts -3- and take out air cowl downwards. Installing Installation is carried out in the reverse order; noting the following in the process: Tightening torques:

Qty.	Nm
Radiator fan to air vent	10
Cowling to radiator	5

–  Install air pipes/hoses with plug-in connectors → Chapter.