seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Removing and installing camshaft control valve?1N205 > < Chain drive

Leon Mk1

Timing chain cover, Assembly overview
   
Timing chain cover, Assembly overview
1 - O ring
q   Replace
q   Lubricate before installing
2 - Guide tube for dip stick
3 - Bolt.
q   9 Nm.
4 - Bolt.
q   9 Nm.
5 - Camshaft control valve 1 -N205-
q   Removing and installing → Chapter.
6 - 
7 - Seal
q   Lubricate before installing
q   Replace if damaged
8 - Bolt.
q   Tightening sequence → Fig.
9 - Timing chain cover (top)
q   Removing and installing → Fig..
10 - Seal
q   Replace if damaged
11 - O ring
q   Replace
q   Lubricate before installing
12 - Dowel pins
q   For centring cover
13 - Lower cover of the distribution chain
q   Removing and installing → Chapter.
14 - Bolt.
q   Replace
q   Tightening sequence → Fig.
15 - Oil seal
q   For vibration damper
q   replace → Chapter
16 - Plug
q   Replace

   
Upper cover of the distribution chain, tightening sequence
–  Tighten the bolts -1 to 5- in two stages in the sequence specified:
1 - Tighten the bolts by hand
2 - Tighten bolts to 9 Nm.
  A15-10430
Bottom cover of the distribution chain, tightening sequence
–  Tighten bolts -1 to 15- in the sequence shown:
1 - Tighten bolts to 8 Nm.
2 - Retighten the bolts 45°.
  E15-10055

Removing and installing camshaft control valve?1N205 > < Chain drive