seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Removing and installing timing chain cover (top) > < Timing chain cover, Assembly overview

Leon Mk1

Removing and installing camshaft control valve 1N205
Removing and installing camshaft control valve 1 -N205-
Removing → Anchor.
Installing → Anchor.
Consult the equivalence table for tools and equipment according to applicability among Seat / VW / Audi / Skoda → Chapter.
Special tools and workshop equipment required
   
t  Torque wrench -V.A.G 1331-, see equivalent → Anchor.
  W00-0427
Removing
–  Detach the connector for valve 1 of the variable valve timing -N205--1-
–  Unscrew bolts -arrows- and remove camshaft control valve 1 -N205-.
Fitting
l  Tightening torque → Chapter
Installation is carried out in the reverse order, noting the following:
–  Oil the seal and the O-ring with engine oil.
  A15-10442

Removing and installing timing chain cover (top) > < Timing chain cover, Assembly overview