| –
| To loosen the Poly-V belt, turn the tension device using an e/c 16 spanner in the -direction of the arrow-. |
| –
| Block the tensioning element using a 4 mm Allen key -1-. |
| Installation is carried out in the reverse order; note the following: |
| –
| First place the Poly-V belt over the crankshaft pulley. And finally place the belt on the tension roller. |
Note | t
| Ensure, before installing Poly-V belt, that all ancillaries (alternator, air conditioning compressor) are secured tightly. |
| t
| When fitting the Poly-V belt, ensure that it is fitted with the correct direction of rotation and that it is correctly seated on the pulleys. |
| –
| Start engine and check belt running. |
|
|
|
