Leon Mk1
Part I |
1 - | Cover |
q | Replace the gasket if there is any damage or deterioration |
2 - | 10 Nm |
3 - | Reinforcement tape |
4 - | Cylinder head cover |
5 - | Oil deflector |
6 - | Cylinder head bolt |
q | Replacement |
q | Follow installation instructions and correct sequence when loosening and tightening → Chapter |
7 - | Cylinder head cover joint |
q | Replace if there is damage or deterioration |
8 - | Cover |
q | Replacement |
9 - | Cylinder head |
q | Removing and fitting → Chapter |
10 - | Cylinder head gasket |
q | Replacement |
q | If replaced, refill all the coolant |
11 - | 20 Nm |
12 - | Support |
13 - | Cogwheel for timing belt |
q | Note the position when fitting the toothed belt → Chapter |