Leon Mk1
Exhaust manifold, front exhaust pipe with catalytic converter and accessories: disassembly and assembly |
1 - | Lambda probe, 55 Nm |
q | Grease thread only with “G5”. “G5” must not get into the slots on the probe body |
q | Remove and fit using the spanner -U-40080- |
q | Checking: → Rep. Gr.24 |
2 - | 10 Nm |
3 - | Heat shield |
4 - | Catalytic converter |
q | Only the complete assembly can be replaced with the front exhaust tube. Vehicles not fitted with a catalytic converter have an intermediate silencer instead. |
5 - | To intermediate silencer |
6 - | Exhaust tube, front |
q | Only the whole unit with the catalytic converter can be replaced. |
7 - | 25 Nm |
8 - | Gasket |
q | Replacement |
9 - | 40 Nm |
10 - | Exhaust manifold |
q | Tighten the hot air collector plate securing bolts to a torque of 25 Nm. |