Safety precautions when working on ignition system |
To prevent injuries to persons and/or damage to the fuel injection and ignition system, the following must be noted: |
t
| Do not touch or disconnect ignition cables when the engine is running or being turned at starter speed. |
t
| The ignition must be switched off before connecting or disconnecting injection or ignition system wiring or tester cables. |
Please note the following if test equipment has to be used during a test drive: |
t
| Test and measuring instruments must always be secured to the rear seat and operated by a second person from this location. |
If test and measuring instruments are operated from front passenger's seat and the vehicle is involved in an accident, there is a possibility that the person sitting in this seat may receive serious injuries when the airbag is triggered. |
t
| If the engine is to be turned at starter speed without starting: |
|
|
|