–
| Swing poly V-belt tensioning element with a 16 mm spanner in -direction of arrow- to slacken belt. |
–
| Lock tensioning element in place with a 4 mm Allen key -1-. |
–
| Initially install the poly V-belt over the vibration protection. Finally, push belt onto tensioning roller. |
Further assembly is basically the reverse of the dismantling sequence. |
Note t
| Before fitting the Poly-V belt ensure that all sub-assemblies (alternator, air conditioning compressor) are tight. |
t
| When installing poly V-belt, check direction of belt rotation and proper seating of belt in pulleys. |
–
| Start engine and check belt running. |
|
|
|