Leon Mk1
Assembly overview - silencers with mountings, squareback |
1 - | Front silencer |
2 - | 25 Nm |
3 - | Suspension |
q | Note fitting position: |
4 - | Separating point |
q | Marked by impressions on connecting pipe |
q | For vehicles with front and rear silencer, this is dealing with a continuous component. In event of repairs, the front and rear silencers are available separately with a double clamp for connection. |
q | Cut through connecting pipe with body saw e.g. body saw -V.A.G 1523A- at right angles at the separating point → Fig.. |
5 - | Secondary silencer |