Leon Mk1
| Intake manifold - exploded view |
| 1 - | Intake manifold |
| q | removing and installing → Chapter |
| 2 - | Seal |
| q | Replace |
| 3 - | 7 Nm |
| 4 - | Throttle valve control mechanism -J338- |
| q | Clean → Chapter. |
| q | If renewed, erase learnt values and adapt engine control unit to throttle valve module → Vehicle diagnostic, testing and information system VAS 5051„Guided function“ |
| 5 - | 20 Nm |
| 6 - | Flexible hose |
| q | To brake servo |
| 7 - | O ring |
| q | Replace |
| 8 - | Coolant hose |
| q | For crankcase breather preheater |
| 9 - | Spring-type hose clip |
| q | Remove and install using hose clip pliers -VAS 6340- or spring-type clip pliers -VAS 5024A- |
| 10 - | Crankcase breather preheater |
| q | Removal and installation involves removing the intake manifold → Chapter |
| 11 - | 3 Nm |
| 12 - | Flexible hose |
| q | To crankcase breather vacuum valve |
| 13 - | Intake manifold pressure sender -G71- with intake air temperature sender -G42- |
| q | Clipped onto intake manifold. |
