Leon Mk1
| Active carbon filter system - Components overview |
| 1 - | Active carbon filter |
| q | Removing and fitting → Chapter |
| q | Venting the fuel tank: check → Chapter |
| 2 - | Breather line |
| q | To fuel tank |
| q | To disengage, press the clip in the joint to unlock it |
| 3 - | From fuel tank |
| 4 - | Breather line |
| q | To the Solenoid valve 1 for active carbon filter (pulsed) -N80- |
| 5 - | Hose clip (spring-type clip) |
| 6 - | Solenoid valve 1 for active carbon filter (pulsed) -N80- |
| q | Valve closed with ignition switched off |
| q | Valve is activated (pulsed) by engine control unit when engine is warm |
| 7 - | To throttle valve connection |
| 8 - | Retainer |
| q | Secured to the intake manifold upper part |
| q | For Solenoid valve 1 for active carbon filter (pulsed) -N80- |
| 9 - | Torx socket head bolt, -3 Nm |
| 10 - | 10 Nm |
| 11 - | 10 Nm |
| 12 - | Retainer |
| q | For activated charcoal filter |
| 13 - | 10 Nm |
