seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Activated charcoal filter system: > < Repairing electronic power control (EPC)

Leon Mk1

Vacuum pump: Removing and installing
Vacuum pump: Removing and installing
Special tools and workshop equipment required
   
t  Spanner -T10202-
  W00-1334
t  Torque wrench (40 - 200 Nm) -V.A.G 1332-
Removing:
–  Remove fuel delivery unit → Chapter.
–  Disconnect flange on left from the fuel tank and remove.
  W00-0428
–  Unclip suction-jet pump -1- from base of fuel tank and pull out of opening in fuel delivery unit.
Installing:
Installation is carried out in reverse order. The following should be taken into account:
–  Ensure that suction-jet pump is fitted securely the base of the fuel tank.
–  Install fuel delivery unit → Chapter.
  N20-10798

Activated charcoal filter system: > < Repairing electronic power control (EPC)