seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

Operation process > < Removing and positioning the engine
Engine: dismounting
Engine: dismounting
  Note
t  To carry out this work it will be necessary to disconnect battery earth strap. For vehicles fitted with a coded radio, first check the anti-theft code.
t  The engine is removed from underneath together with the gearbox.
t  All the cable fixings that are opened or cut during removal of the cylinder head must be fitted in the same position when reinstalling the engine.
  Caution
When doing any repair work, especially in the engine compartment, pay attention to the following due to the cramped conditions:
t  All the various lines (e.g. fuel, hydraulic system, active carbon filter system, coolant, refrigerant, brake fluid and vacuum pipes and hoses) and electrical wiring must be installed in their original positions.
t  In order to avoid damage to the lines and cables, ensure sufficient clearance for all moving or hot components.
Work sequence → Chapter
Securing engine to assembly stand → Chapter.
   

Operation process > < Removing and positioning the engine