seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

Conversion table by relevance > < Z?ndung: instand setzen
Safety precautions
Safety precautions
To prevent injuries to persons and/or serious damage to the fuel injection and ignition system, the following must be noted:
t  Do not touch or remove the ignition cables with the engine running or idling.
t  The ignition must be switched off before connecting or disconnecting injection or ignition system wiring or tester cables.
t  If the engine is to be turned at starter speed without starting:
–  Pull the fuse for the injector and the ignition transformer from the securing bracket. Fuse allocation → Current flow diagrams, Electrical fault finding and Fitting locations
Please note the following if test equipment has to be used during a test drive:
t  Test and measuring instruments must always be secured to rear seat and operated by a second person.
If test and measuring instruments are operated from front passenger seat, there is a possibility that the person sitting in this seat may receive serious injuries when the airbag is triggered.
–  Erase fault memory of engine control unit after completing work as faults are stored when the fuse is extracted. → Vehicle diagnostic, testing and information system VAS 5051„Guided function“.
   

Conversion table by relevance > < Z?ndung: instand setzen