seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Servicing valve gear: servicing > < Engine: Dismantling and assembling

Leon Mk1

Removal
Removal
  Caution
When doing any repair work, especially in the engine well, due to the cramped conditions, pay attention to the following:
Route all pipes/hoses (e.g. fuel, hydraulics, activated charcoal filter system, coolant, refrigerant, brake fluid and vacuum pipes and hoses) and electrical wiring so that the original positions are restored.
Ensure sufficient clearance to all moving or hot components.
–  With ignition switched off disconnect battery earth strap.
  Note!
Check whether a coded radio is installed as during the forthcoming work sequences the battery earth strap must be disconnected. Obtain radio code first if necessary.
–  Remove air filter together with air intake connecting piece: → Chapter
–  First remove main drive toothed belt → Chapter.
   

Servicing valve gear: servicing > < Engine: Dismantling and assembling