Leon Mk1
| Air cleaner: dismantling and assembling |
| Air cleaner: removal and installation → Fig. |
| 1 - | 3 Nm |
| q | Observe notes on installing → Chapter |
| 2 - | Plug |
| q | Note fitting position |
| 3 - | Crankcase breather hose |
| q | From oil separator: → Chapter |
| 4 - | Air cleaner upper part |
| 5 - | Filter element |
| 6 - | Air cleaner lower part |
| 7 - | Sealing ring |
| q | Check for secure seating |
| q | Renew if damaged |
| 8 - | Connecting hose |
| 9 - | Warm air intake hose |
| q | From warm air collector plate: → Chapter |
| 10 - | Air intake housing with regulating flap |
| q | Check intake air preheating → Chapter |
| 11 - | 5 Nm |
| 12 - | Connecting piece for cold air intake |
| q | Additionally secured on body with retaining clip |
