Leon Mk1
Fuel rail with injectors: dismantling and assembling |
1 - | Fixing plate |
q | Note fitting position |
q | Renew if damaged |
2 - | 5 Nm |
3 - | 10 Nm |
4 - | Fuel rail |
q | Removing and installing → Anchor, injectors: Checking spray pattern and for leaks |
5 - | Retaining clip |
q | Ensure seated correctly at injector and fuel rail |
6 - | O-ring |
q | Renew |
q | Before installing moisten with clean engine oil |
7 - | Injectors -N30-...-N33-)* |
q | Checking → Chapter |
q | Resistance 14.0...17.0 Ω |
8 - | Supply hose |
q | Black with white mark |
q | Secure with spring-type clips |
q | Check for secure seating |
q | From fuel filter: → Chapter |
9 - | Return hose |
q | Blue or with blue marking |
q | Secure with spring-type clips |
q | Check for secure seating |
q | To the fuel delivery unit in fuel tank: → Chapter |
10 - | O-ring |
q | Renew if damaged |
11 - | Fuel pressure regulator |
q | Checking → Chapter, Fuel pressure regulator and holding pressure: checking |
12 - | Vacuum hose |
q | To intake manifold → Item |