Leon Mk1
| Analysis measurement value blocks, display group 100 -conformity code- |
| Display group 100 -conformity code- | ||||||||
| ||||||||
| Read measurement value block 100 | → | ← The display reads: | ||||||
| xxxxxxxx | xxx.x °C | xxx.x s | xxxxxxxx | |||||
| 1 | 2 | 3 | 4 | ← Display fields | Target value | Analysis | ||
| Diagnostic state | --- | --- | ||||||
| Time since engine startup | --- | --- | ||||||
| Coolant temperature | 80.0...110.0 °C | → Anchor | ||||||
| Conformity code | 00000000 | → Anchor | ||||||
|
| All digits must be “0” before generating the conformity code | ||||||||
| 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | Diagnostic function |
| 0 | Catalyst | |||||||
| 0 | Catalyst heating (at this time there is no diagnosis/ always “0”) | |||||||
| 0 | Activated charcoal filter system (tank deaeration system) | |||||||
| 0 | Secondary air system (does not exist/always “0”) | |||||||
| 0 | Air conditioning (at this time there is no diagnosis/ always “0”) | |||||||
| 0 | Lambda probes | |||||||
| 0 | Lambda probe heating | |||||||
| 0 | Exhaust gas recirculation (does not exist/always “0”) | |||||||
