Leon Mk1
|
Function | Premise | |||
Functions of fault reader -V.A.G 1551-, -V.A.G 1552- or -VAS 5051- | Engine off,ignition on | Engine idling | Vehicle moving | |
01 | Consult control unit version | yes | yes | yes |
02 | Consult fault memory | yes → Note | yes | yes |
03 | Final control diagnosis | yes | no | no |
04 | Basic settings → Note | yes | yes | yes |
05 | Clear the fault memory | yes | yes | yes |
06 | End transmission | yes | yes | yes |
07 | Encode control unit | no | no | no |
08 | Read measurement value block | yes | yes | yes |
10 | Adaptation | no | no | no |
15 | Read conformity code | yes | yes | yes |
1) | Do so if the engine does not start. The ignition must be on. (First, operate the starter motor for at least 6 seconds.) |
2) | Must be carried out after replacing the engine control unit, the throttle valve drive unit or engine, or disconnecting the battery. |