Leon Mk1
Haldex Clutch, (4th generation) disassembly and assembly - assembly overview, Altea XL 2009 ►, Altea XL Freetrack 2008 ►, Altea XL Freetrack 2009 ►, Alhambra 2011 ► |
1 - | Seal |
q | Moisten with high performance oil for Haldex clutches and install |
q | Always replace. |
2 - | Housing for Haldex coupling |
q | Removing and installing Haldex coupling → Chapter |
3 - | All-wheel drive control unit -J492- |
q | With valve that controls the opening of the clutch -N373- |
q | Removing and installing → Chapter>>>>>>>> |
4 - | Bolts |
q | 6 Nm |
5 - | Oil seal for propshaft flange |
Replace → Chapter |
6 - | Propshaft flange |
q | Removing and installing → Chapter>>>>>>>> |
7 - | Nut |
q | 210 Nm |
q | Secure using locking fluid → Spare parts catalogue |
8 - | Bolts |
q | 4x |
q | Tightening torque: 50 Nm |
9 - | End cover |
q | For oil filter housing |
q | It is not necessary to change the filter |
10 - | End cover |
q | For pressure accumulator |
WARNING
|
11 - | Seal |
q | 2 off |
q | Diameter 34 mm |
q | For the pump for the Haldex clutch -V181- |
q | Moisten with high performance oil for Haldex clutches and install |
q | Always replace. |
12 - | Haldex coupling pump -V181- |
q | Removing and installing → Chapter>>>>>>>> |
13 - | Bolts |
q | 6 Nm |