Leon Mk1
| Haldex Clutch, (4th generation) disassembly and assembly - assembly overview, Altea XL 2009 ►, Altea XL Freetrack 2008 ►, Altea XL Freetrack 2009 ►, Alhambra 2011 ► |
| 1 - | Seal |
| q | Moisten with high performance oil for Haldex clutches and install |
| q | Always replace. |
| 2 - | Housing for Haldex coupling |
| q | Removing and installing Haldex coupling → Chapter |
| 3 - | All-wheel drive control unit -J492- |
| q | With valve that controls the opening of the clutch -N373- |
| q | Removing and installing → Chapter>>>>>>>> |
| 4 - | Bolts |
| q | 6 Nm |
| 5 - | Oil seal for propshaft flange |
| Replace → Chapter |
| 6 - | Propshaft flange |
| q | Removing and installing → Chapter>>>>>>>> |
| 7 - | Nut |
| q | 210 Nm |
| q | Secure using locking fluid → Spare parts catalogue |
| 8 - | Bolts |
| q | 4x |
| q | Tightening torque: 50 Nm |
| 9 - | End cover |
| q | For oil filter housing |
| q | It is not necessary to change the filter |
| 10 - | End cover |
| q | For pressure accumulator |
WARNING
|
| 11 - | Seal |
| q | 2 off |
| q | Diameter 34 mm |
| q | For the pump for the Haldex clutch -V181- |
| q | Moisten with high performance oil for Haldex clutches and install |
| q | Always replace. |
| 12 - | Haldex coupling pump -V181- |
| q | Removing and installing → Chapter>>>>>>>> |
| 13 - | Bolts |
| q | 6 Nm |
