SEAT Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
Oil level of Haldex coupling (2nd Generation), check or top up where applicable, Altea?XL?2009??, Altea?XL?Freetrack?2008??, Alt >
< Oil level of the rear final group (2nd Generation), check or top up where applicable, Altea?XL?2009??, Altea?XL?Freetrack?2008??
Leon Mk1
Propshaft and rear final drive
Final drive, differential, differential lock
Renewing oil seals for flange shafts
Removing flange shaft oil seal
Removing flange shaft oil seal
The left and right hand seals are replaced in the same manner.
–
Remove the cardan shaft
→ Running gear, shafts, steering; Rep. gr.42
.
–
Place the drip tray -VAS 6208- under the final group.
Removal of flanged shaft, left hand side:
–
Place an M8 nut on the thread of the extractor -T10037-
-arrow-
until it is flush with the start of the thread.
–
Remove the flanged shaft using the extractor -T10037 -.
Removal of flanged shaft right hand side:
–
Place an M8 nut on the thread of the extractor -T10037-
-arrow-
until it is flush with the start of the thread.
–
Remove the flanged shaft using the extractor -T10037 -.
Continuation for both sides:
–
Extract the flanged shaft seal using the extractor set -VW 681-.
Propshaft and rear final drive
Final drive, differential, differential lock
Renewing oil seals for flange shafts
Oil level of Haldex coupling (2nd Generation), check or top up where applicable, Altea?XL?2009??, Altea?XL?Freetrack?2008??, Alt >
< Oil level of the rear final group (2nd Generation), check or top up where applicable, Altea?XL?2009??, Altea?XL?Freetrack?2008??