seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Rear brake caliper: repairs > < Brake pressure regulator

Leon Mk1

Vacuum pump for brake servo for 4 cylinder petrol motor, BYT-BZB: removal and installation
Vacuum pump for brake servo for 4 cylinder petrol motor, BYT-BZB: removal and installation
Removing
–  Remove the air filter body, the bleeding hose and the air flow hoses → Airfilter: removal and installation; Rep. gr.24.
–  Remove high pressure pump → mixture preparation, injection, E-Gas; Rep. gr. 24
   
–  Disconnect the vacuum hose from the vacuum pump -1- and place to one side.
–  Undo the nut -2- and remove the earth cable.
–  Remove the coolant pipe upwards.
  A15-10441
–  Undo the bolts -arrows- and remove the vacuum pump.
Installing
Install in reverse order.
  E47-10010

Rear brake caliper: repairs > < Brake pressure regulator