seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Graphic information on tool and equipment equivalents VW / SEAT > < Removal:

Leon Mk1

Installation
Installation
–  The piston and join ring surfaces can only be cleaned using alcohol and immediately dried.
–  Before fitting the piston and seal ring, apply a thin coating of assembly paste → Parts catalogue.
–  Insert sealing ring in brake caliper housing.
   
–  Fit the protective cover with the outer sealing lip over the piston.
  N47-0079
–  Insert the inside sealing lip into the groove of the cylinder using the lever -U 30800-.
  Note
When doing this hold piston in front of calliper housing.
  E47-0027
–  Insert the brake calliper piston using the press tool -T10145-.
  Note
The outer sealing lip of the protective cap will then locate in the groove on the piston.
  V47-0409

Graphic information on tool and equipment equivalents VW / SEAT > < Removal: