seat Workshop Repair Guides

SEAT Leon Workshop Service and Auto Repair Manuals

ABOUT US
Joining brake pedal to brake servo > < Brake pedal - Assembly overview

Separating brake pedal from brake servo on Leon Mk1: Assembly overview

Separating brake pedal from brake servo
Separating brake pedal from brake servo
Special tools and workshop equipment required
   
t  Device to disconnect brake pedal piston -U-40015-
–  Remove driver's side covering.
–  Remove brake light switch.
–  Remove brake pedal switch -F47-.
  W00-2191
–  First press brake pedal in direction of brake servo and hold.
1 - Brake pedal
2 - Push rod
3 - Retaining lugs
–  Fit device -U-40015- and pull towards drivers seat, when doing this counter-hold on brake pedal (pedal must not be able to move to rear at this moment). This will press the retainers -3- of the mounting off the ball head of the push rod -2-.
  Note!
For ease of illustration separating the brake pedal from the brake servo is shown with the pedal cluster removed.
–  Pull device -U-40015- and brake pedal together towards drivers seat. (The brake pedal will then be pulled off the ball head of the push rod).
  E46-0004

Joining brake pedal to brake servo > < Brake pedal - Assembly overview