seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Repairing front brakes > < Assembly overview - brake pedal up to model year 2000

Leon Mk1

Installing and adjusting:
Installing and adjusting:
–  Before installing pull plunger out fully.
–  Push brake pedal down as far as possible by hand.
   
–  Guide switch through assembly opening and secure by turning 90° to right.
–  Release brake pedal.
–  Fit brake light switch connector.
–  Check function of brake light.
After adjusting the brake light switch check whether the brake pedal is on the limit stop (rest position).
–  Install driver's side trim → General body repairs, interior; Rep. Gr.68.
  N46-0310

Repairing front brakes > < Assembly overview - brake pedal up to model year 2000