t
| Brake filling and bleeder unit -SAT 1150- |
Note! Bleeding the brake system on vehicles with ABS is performed in same way as vehicles with a conventional brake system. |
–
| Connect brake filling and bleeder unit -SAT 1150-. |
–
| Open bleed screws in the specified order and bleed brake calipers and wheel cylinders. |
1 - | Rear right wheel cylinder/brake caliper |
2 - | Rear left wheel cylinder/brake caliper |
3 - | Front right brake caliper |
4 - | Front left brake caliper |
Vehicles with ABS or ABS/EDL |
With these vehicles a test drive must be carried out after bleeding brakes. When doing this an ABS regulation must be performed at least once! |
Note! Move brake pressure regulator lever when bleeding rear brakes on vehicles with a brake pressure regulator. |
|
|
|