seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Verification of the constant velocity joint operation > < Removing

Leon Mk1

Fitting
Fitting
   
–  Fit the ball hub on both bevels in the ball cage, the fitting position is arbitrary. Press on the balls so that they are pushed into place in the cage.
–  Fit the hub with the cage and the balls vertically in the cage element.
  Note
  V40-0011
t  When fitting, ensure that the larger distance -a- on the joint housing coincides at all points with the smaller distance -b- on the hub after turning it.
t  The bevel on the internal diameter of the ball hub (cogs) should point to the larger diameter of the joint element.
  V40-0012
–  Rotate the ball hub, to do this, gently pull out -arrows- the hub from the cage, so that the balls maintain the distance from the friction tracks.
  V40-0013
–  Press hard on the cage -arrow- insert turning the ball hub.
  V40-0014

Verification of the constant velocity joint operation > < Removing