seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Wheel bearing - assembly overview > < Coil springs, shock absorbers and mounting bracket as one unit

Leon Mk1

Installing
Installing
   
–  Insert rear suspension link into subframe in -direction of arrow- and swivel forwards.
  N40-10393
–  Insert the bolts -arrows- of the engine assembly and tighten to the specified tightening torque .
  N40-10394
–  Mount the ball joint to the wishbone and tighten the nuts -arrows- to the specified tightening torque.
–  Raise the suspension until it reaches the position of unladen weight → Chapter.
Perform remaining installation in reverse order of removal.
–  Install lower noise insulation → Rep. gr.50 .
  Note
Ensure that bellows are not damaged or twisted.
Tightening torques → Chapter
If the wishbone is replaced, the axles of the vehicle must be re-aligned → Chapter
  N40-10391

Wheel bearing - assembly overview > < Coil springs, shock absorbers and mounting bracket as one unit