seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Anti-roll bar > < Transverse link

Leon Mk1

Installation
Installation
Installation is carried out in the reverse sequence; note the following:
–  Insert the link bar in the vehicle and tighten the bolts by hand.
The steering knuckle may only be bolted when having the elevation measured prior to assembly, between the centre of the wheel hub and the lower rim of the wheel housing → Chapter.
   
Specified torques
ComponentTightening torque
Track rod to wheel bearing housing
t  Use new nuts and bolts
t  Tighten threaded connections only when vehicle is in the normal running position
130 Nm + 90°
Track rod to subframe
t  Use new nuts and bolts
90 Nm + 90°
Anti-roll bar to subframe
t  Use new bolts.
t  Tighten threaded connections only when vehicle is in the normal running position
25 Nm +45°
Anti-roll bar to coupling rod
t  Use new nuts
45 Nm

–  Check wheel alignment → Chapter
   

Anti-roll bar > < Transverse link