Leon Mk1
|
-Arrow- indicates direction of travel. |
1 - | Bolt. |
q | 50 Nm +45° |
q | Replace after each removal |
2 - | Mounting bracket |
3 - | Bolt. |
q | M12 x 1.5 x 80 |
q | 90 Nm + 90° |
q | Replace after each removal |
4 - | Coupling rod |
5 - | Bolt. |
q | 90 Nm + 90° |
q | Replace after each removal |
q | Only wheel bearing housings made from aluminium are available as replacement parts. Therefore, certain parts have to be exchanged and/or installed in addition when replacing → Chapter |
6 - | Longitudinal transversal swinging arm |
q | removing and installing → Chapter |
q | Repairs → Chapter |
7 - | Drive shaft |
q | Assembly overview → Chapter |
q | removing and installing → Chapter |
8 - | Bolt. |
q | M12 x 1.5 x 45 |
q | 70 Nm + 90° |
q | Replace after each removal |
9 - | Wheel bearing housing |
q | Removing → Chapter |
q | Installing → Chapter |
q | Installing with wheel bearing housings made from aluminium is permissible → Electronic parts catalogue „ETKA“ |
q | Only wheel bearing housings made from aluminium are available as replacement parts. Therefore, certain parts have to be exchanged and/or installed in addition when replacing → Chapter |
10 - | Rear speed sensor -G44/G46- |
11 - | Bolt. |
q | 9 Nm |
12 - | Bonded rubber bush |
q | replace → Chapter |
13 - | Nut |
q | 40 Nm |
q | Self-locking |
q | Replace after each removal |
14 - | Cross-head screw |
q | 4 Nm |
15 - | Brake disc |
16 - | Bolt. |
q | Different versions available |
q | Assignment → Electronic parts catalogue „ETKA“ |
q | Hexagon bolt = 180 Nm + 180° further |
q | Loosening and tightening hexagon bolt for drive shaft → Chapter |
WARNING
|
17 - | Wheel hub with wheel bearing |
q | The ABS sensor ring is fitted in the wheel hub |
q | removing and installing → Chapter |
The wheel bearing and wheel hub are assembled in one housing. |
This wheel bearing/hub unit is maintenance-free and has zero play. Adjusting and repair work is therefore not possible! |
18 - | Bolt. |
q | 10 Nm |
q | Only wheel bearing housings made from aluminium are available as replacement parts. Therefore, certain parts have to be exchanged and/or installed in addition when replacing → Chapter |
19 - | Cover plate |
q | Only wheel bearing housings made from aluminium are available as replacement parts. Therefore, certain parts have to be exchanged and/or installed in addition when replacing → Chapter |