| –
| Check whether the wheel bolts can be easily tightened by hand. When fitting the wheel, the thread of the nuts should turn easily along the whole length of the nut. |
| –
| Ensure that the hub thread coincides. The thread of the wheel nuts should not come into contact with the brake disc opening. |
| If the thread of the wheel bolt touches the opening, turn the brake disc as necessary. |
| –
| Fit the wheel to the hub and secure by hand-tightening two bolts in opposite positions. |
| –
| Screw in the remainder of the bolts by hand; the bolts should be easily screwed into place. |
| Ensure that the wheel is perfectly centred. |
| –
| Hand tighten the wheel nuts evenly. |
|
|
|
Note
