Leon Mk1
Assembly overview - steering column, column tube |
Note
t | Renew self locking nuts and bolts. |
t | Welding and straightening work on steering components is not permitted. |
This overview is provisionally for all LHD and RHD vehicles |
1 - | Steering lock housing |
q | Removing and installing lock cylinder → Rep. Gr.94 |
2 - | Bearing ring |
3 - | Hexagon bolt |
q | 40 Nm |
q | Always renew after removing |
4 - | Steering column |
q | Cannot be dismantled. |
5 - | Operating lever |
6 - | Clamping bolt |
7 - | Column tube |
8 - | Protective sleeve |
9 - | Guide |
10 - | Washer |
11 - | Self-locking hexagon nut |
12 - | Thrust piece |
13 - | Spring |
14 - | Spring |
15 - | Housing |
16 - | Shear head bolt |
q | Tighten until head shears off. |
17 - | Bolt |
q | 12 Nm |
18 - | Hexagon bolt |
q | 25 Nm |