Leon Mk1
| Assembly overview - power assisted steering box (RHD) |
| It is not intended that repair work be carried out on the power assisted steering box. If problems are reported, perform a pressure test and a leakage test to determine the cause. If a fault is detected, renew the power assisted steering box. |
Note| t | Renew self locking nuts and bolts. Welding and straightening work on steering components is not permitted. |
| t | To lubricate steering rack, use only steering box grease -AOF 063 000 04-. |
| t | Renew self locking nuts and bolts. |
| t | Fluid type: hydraulic fluid -G 002 000- |
| t | Quantity of oil in system: approx. 1 ltr. |
| The specified torques for |
| t | Lock nut on track rod |
| t | Steering box to sub-frame |
| t | Track rod to steering box |
| t | Track rod ball joint to wheel bearing housing |
| are the same for left and right-hand drive. |
| They are not shown in this illustration. |
| 1 - | 10 Nm |
| 2 - | Heat shield |
| 3 - | Pressure line |
| q | 30 Nm |
| q | The pressure pipe must not touch the return line. |
| 4 - | Union bolt |
| q | 12 Nm |
| q | For return line. |
| 5 - | Seal |
| q | Renew. |
| 6 - | Power steering box |
| q | Removing and installing to model year 2000 → Chapter. |
| q | Removing and installing from model year 2001 → Chapter. |
| 7 - | Stop |
| Must rest on surface -arrow A-. |
