seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

Emergency tyres and rim for SEAT vehicles > < Technical data on wheels for Exeo 2009, Exeo ST 2009
Technical data on wheels for Mii 2012
Technical data on wheels for Mii 2012
General information
SEAT vehicles are designed in accordance with the latest safety techniques. In order for this to continue, we recommend that only original SEAT spare parts are used. This is indicated by the SEAT trademark and the part number. These parts have been checked for reliability, safety and suitability.
Despite continual market observations, these aspects cannot by determined by other products. In view of the above, it is therefore understandable that we cannot assume responsibility where these products are mounted.
The wheel rim/tyre combinations or alternative equipment specified in the charts for each vehicle refer exclusively to Genuine SEAT wheel rims. It is not possible to authorise rim and tyre combinations or even the exchange of rim equipment resulting from the trade of accessories.
  WARNING
The tightening torques of the wheel nuts and the corresponding conditions for handling and assembly should be observed.
Data table
   
EngineWheels (rims)TyreLoad indexMinimum Code letter for speed category 1)Chains (max. thickness)
Petrol engines
1.0 44 kW
1.0 55 kW
5Jx14 ET35165/70 R14 81T--Yes
175/65 R14 82T--Yes
5.5Jx15 ET41185/55 R15 82T--no

1) This is the minimum permissible technical speed index letter. See documents → Chapter or EU homologation → Chapter for vehicle to determine letter applicable for vehicle.
  Note
Tyre pressures are given on the inside of the fuel cap → Chapter.
  Note
t  Further information on snow chains is given in → Chapter.
t  Further information on all-season tyres is given in → Chapter.
t  Further information on winter tyres is given in → Chapter.
   

Emergency tyres and rim for SEAT vehicles > < Technical data on wheels for Exeo 2009, Exeo ST 2009