seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Anti-theft alarm (ATA) > < Immobilizer for vehicles without entry and start authorisation control unitJ518

Leon Mk1

Ultrasonic alarm system sensorG209: Removing and installing (vehicles with sun roof)
Ultrasonic alarm system sensor -G209-: Removing and installing (vehicles with sun roof)
Special tools and workshop equipment required
   
t  Wedge -U 30800-
  Note
The alarm system must be deactivated to remove the ultrasonic sender of the alarm system → Chapter.
Removing:
–  Disconnect ignition and all electrical loads, and remove ignition key.
  W00-2169
–  Disengage the cover -1- with the disassembling wedge -U 30800- from the inserts, with the -arrows-.
  E96-10088
–  Disconnect the connector -arrow A- of the ultrasonic alarm system sensor -G209--2-.
–  Remove the ultrasonic alarm system sensor -G209--2- in the -direction of arrow B- from the trimming-1-.
Installing:
Install in reverse order.
  E96-10089

Anti-theft alarm (ATA) > < Immobilizer for vehicles without entry and start authorisation control unitJ518