seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Ignition lock > < Installing

Leon Mk1

Warning light SAFE-fuse of the central locking systemK133 remove and install
Warning light SAFE-fuse of the central locking system -K133- remove and install
The central locking SAFE indicator light -K133- is fitted to the door trim on the driver's side.
Removing
–  Switch off ignition and all electrical consumers and remove ignition key.
–  Remove the driver side door panelling: → Interior body assembly; Rep. gr. 70
–  Undo the screws, 2 off, under the door trim.
   
–  With the lever -U 30800- detach the door pull cover-1-.
  E96-10112
–  Screw out bolts -arrows-.
–  Wind down the door window.
  E96-10113
–  Push the door trim upwards until it is exposed from the guide.
  E96-10177
–  Position the lever -U 30800- between the trim -1- and the door.
  E57-10019
–  Press the tabs on the central locking SAFE indicator light -K133--1- in the direction of the -arrows- and remove.
–  Cut off the wiring harness of the central locking deadlock function warning lamp -SAFE- - K133- at the greatest possible distance to the warning lamp -1-.
–  Reinstall the central locking deadlock function warning lamp -SAFE- - K133- using the wiring harness repair set -VAS 1978B-.
For further information, see → Electrical system: General information; Rep. gr. 97
Installing
Install in reverse order to dismantling, noting the following.
  Note
In order to avoid noises, we recommend that the connections are stuck on using adhesive and that the wiring harness of the central locking deadlock function warning lamp -SAFE- - K133- is fixed to the door trim.
  E96-10178

Ignition lock > < Installing