seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Checking treble hornH2 and bass hornH7 > < Treble hornH2 and bass hornH7

Leon Mk1

Removing and installing treble hornH2 and bass hornH7
Removing and installing treble horn -H2- and bass horn -H7-
Special tools and workshop equipment required
   
t  Torque wrench -V.A.G 1331-
Removing:
–  Switch off ignition and all electrical loads, and pull out ignition key.
–  Remove front bumper cover → General body repairs, exterior; Rep. gr.63
  W00-0427
–  Release connector -1- and disconnect.
–  Unscrew securing bolt -arrow- and remove signal horn -2- together with bracket.
Installing:
For fitting, the operations are carried out in reverse order to the removal, taking the following into account:
  Note
When installing, position the signal horn so it is not in contact with adjacent components.
–  Tighten securing bolt for bracket on side member to 20 Nm.
  N96-10640

Checking treble hornH2 and bass hornH7 > < Treble hornH2 and bass hornH7