seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Lights, lamps, switches inside, anti-theft system|Horn > < Lights inside the passenger compartment and the boot

Leon Mk1

Removing and installing glove box light
Removing and installing glove box light
Removal:
   
–  Switch off ignition and all electrical consumers and take out ignition key.
–  Turn light switch to „0“ position.
–  Using a flat screwdriver, press in retaining tab -1- and pry out glove box light -2-.
–  Disconnect the electrical connector -3-.
–  Take bulb (12 V, 5 W) on reverse side of footwell light out of bulb holder.
Installation
Installation is carried out in reverse order, noting the following:
–  Insert glove compartment light in opening and engage on opposite side.
  E96-10129

Lights, lamps, switches inside, anti-theft system|Horn > < Lights inside the passenger compartment and the boot