seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Servicing ultrasonic interior monitor > < Lights and switches in engine compartment

Leon Mk1

Removing and installing bonnet contact switchF266
Removing and installing bonnet contact switch -F266-
Removing:
–  Switch off ignition and all electrical loads, and pull out ignition key.
–  Remove bonnet catch → General body repairs, exterior; Rep. gr.55.
  Note
The Bowden cable can remain connected to the lid lock.
   
–  Cut off cable tie -2-.
–  Release locking lug -1- and move bonnet contact switch -F266- in elongated holes until it can be removed.
Installing:
Installation is carried out in reverse order.
  N96-10372

Servicing ultrasonic interior monitor > < Lights and switches in engine compartment