seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

Lights, lamps, switches inside, anti-theft system|Horns > < Button to close rear lid in luggage compartmentE406
Removing and installing button to close rear lid in luggage compartmentE406
Removing and installing button to close rear lid in luggage compartment -E406-
Special tools and workshop equipment required
   
t  Removal wedge -VAS 3409-
  Note
When removing and installing components that are in view (switches, covers, trim and so on), mask off areas in which tools (removal wedge -VAS 3409-, screwdriver) are used to lever out those components using commercially available tape.
Removing:
–  Switch off ignition and all electrical loads, and pull out ignition key.
  W00-0016
–  Carefully lever out button from rear lid trim using removal wedge -VAS 3409- or a suitable screwdriver.
  N96-0388
–  Release connector -arrow- and disconnect.
–  Remove button.
Installing:
Installation is carried out in reverse order.
  N96-0389

Lights, lamps, switches inside, anti-theft system|Horns > < Button to close rear lid in luggage compartmentE406